Visara LINCS Central Control - Manual (Page 121)

115
Chapter 13. Communications Menu
707024-002
• MTU – Maximum transmission frame size
• Inter-board Routing – Indicates whether IP routing is enabled between cards
• Interface Routing – Indicates whether IP routing is enabled on the card
PING
The Ping panel allows you to test the network interfaces by generating a PING to other nodes
on the network. Just type the IP address you wish to PING at the ‘Ping:’ prompt and press
PF10. If the LINCS platform has been configured to communicate with a DNS server, you
can also PING DNS names. The PING response success will be indicated in the Response
area of the panel.
Ping (ICMP Echo Request) LINCS C8.2 Central Control
Response
————————————————————————
Rsp from 199.005.182.180 seq.= 001 Time 00000 ms
Rsp from 199.005.182.180 seq.= 001 Time 00000 ms
Rsp from 199.005.182.180 seq.= 001 Time 00000 ms
————————————————————————
Average Response Time:00000
Ping: 199.5.182.180
Complete
PF: 1-Menu 4-Clear 10-Process
Trace Route
This utility is currently not available from LINCS.
LLC Menu
From the LLC menu, you may display or clear LLC circuit statistics.
LLC Menu LINCS C8.2 Central Control
Test Description
1,u Display/Update Circuit Status
2 Clear All Circuit Statistics
Select Item: Depress Enter
PF: 1-Main 3-Prev
Display Circuit Status - LLC Menu
The Display Circuit Status panel allows you to display various types of LLC circuits that are
supported by LINCS. Included are:
•
Host Circuits
•
Gateway Circuits
•
APPN Circuits
•
LU/PU Mapped Circuits