Visara LINCS Central Control - Manual (Page 128)

122
LINCS Central Control
707024-002
Bytes Received
Number of bytes received.
Bytes Transmitted
Number of bytes transmitted.
Duplicate Messages
Number of duplicate messages detected.
Forward Out-Of-Sequence Messages
This is the number of messages received out of order.
Retransmitted Messages
Number of frames retransmitted.
Bad Circuit Messages
Number of bad circuit messages detected.
Bad Circuit Slots
Number of bad circuit slots detected.
Host-initiated Accepted
Number of host-initiated connections accepted.
Host-initiated Rejected
Number of host-initiated connections rejected.
Multiple Nodes
Number of multiple nodes detected.
Clear All LAT Statistics
This utility is password protected. It clears all LAT line and node statistics. If no parameters
are entered at this test, all statistics will be cleared on all ETH boards. If a line number is
entered as a parameter, all statistics for that line only will be cleared.
IPX Menu
This IPX Menu will give users access to IPX, RIP, and SAP status information display panels
and Router and Server functions.
IPX Menu LINCS C8.2 Central Control
Item Description
1 Display/Update IPX Network Status
2 Display RIP Routing Information Table
3 Display SAP Service Information Table
4 Reset IPX Router
Select Test: Depress Enter
PF: 1-Menu
Display/Update IPX Network Status
This LINCS Central Control will allow you to view the IPX, RIP, and SAP status and error
counters for the internal network and each direct connect IPX network segment. You can also
reset the various IPX counters for the currently displayed network. Additional information
about the last packet discarded will also be displayed, if a packet has been discarded since the