Dlc trace events, Appn internal trace, Rtp connection – Visara LINCS Central Control User Manual
Page 153

147
Chapter 13. Communications Menu
707024-002
DLC Trace Events
The DLC Trace Events panel provides a tracing of the data link control packets handled by
the APPN feature. This panel is only available to authorized support personnel.
Display DLC Trace Events
LINCS C8.2 Central Control
Event
Data
0063
APPN _DLC
11/06/98, 12:01.33
Ln/Dir 00BB01
DLC
DLC00229
Port
PORT0002
LS
LS000000
Data
00000000
00000000
007AEADE
00040000 00000000 000020FA 00030000 10990090
0301009E
5010000E
00900014
02030001 00020000 02000004 00010000 4C533030
30303030
00000000
1500026E
00000002 00010001 00900007 00000200 DDDD0065
08000000
00000000
00000000
00000000 00000000 00000000 00000000 00000000
00000000
00002E00
0302000C
4B910100 2E000302 000C4B91 01040006 00000000
PF: 1-Menu
7-Back 8-Forw
APPN Internal Trace
The Internal trace provides a logging of events internal to the APPN protocol stack. The
information contained within is for use by support personnel only. This panel is normally
only accessible to support personnel.
APPN Internal Trace
LINCS C8.2 Central Control
Event
Data
00C8
APPN_Internal
11/06/98, 12:01.33
SRC$:APN$DSU 571: apn_dlc_trace_flow
LS_CB: 0x78aefe
State: 9, SEND SIG: dlc_mu
00C9
APPN_Internal
11/06/98, 12:01.33
SRC$:APN$DSU 564: apn_dlc_trace_flow
EVENT: DLC_MU
Signal buffer available - COM_I_FRAME frame sent
00CA
APPN_Internal
11/06/98, 12:33.57
SRC$:APN$DSU 677: apn_nof_trace_msg
NOF Rcvd Message,
pcm=0x4d5070, msgid= 0x601e, sender=0x13000d
00CB
APPN_Internal
11/06/98, 12:33.57
SRC$:APN$DSU 653: apn_nof_trace_sig
NOF Rcvd Sig,
appc_Hdr=0x7b97fe, opcode= 0x2129, prc=0x610, src= 0
End of Trace Buffer>
PF: 1-Menu
7-Back
Memory Manager Tuning Data
This panel is no longer available at current levels of code.
RTP Connection
This panel allows you to display RTP connections only when HPR (High Performance Routing)
is in use. When the update option is chosen, it is possible to initiate the use of an alternate
route from this panel.