Visara LINCS Central Control - Manual (Page 32)

26
LINCS Central Control
707024-002
If a function is left with a blank control sequence, that function will be inactive. Only the
fields that apply to the device being defined need be entered. The six graphic characters on
this panel will be the only graphic characters supported by the UDDs.
PF7 returns to the Modify Display Cursor Positioning panel. PF8 displays the next panels in
this series, the Inbound Key Sequences panels.
Graphic Characters
The mnemonics for graphics characters shown mean:
• right lower corner
• right upper corner
• left lower corner
• left upper corner
Inbound Key Sequences
The following keys are required to have control sequences assigned to them:
• Reset
• Device Cancel
• Test
• System Request
• Enter
Each of the following inbound key sequence panels has a primary and an alternate sequence
field for each key. Remember that only one sequence of the above list is mandatory. The
alternate list is provided in case you anticipate that the primary key sequence may not easily
be accessible at some time.
Each of the six inbound key sequence panels must have its sequences follow the rules listed
below.
• The first byte of an inbound sequence has to be in the range: 00x - FF
• One inbound sequence cannot be a subset of another inbound sequence.
• A null or space entry terminates a sequence (they are not sent).
Inbound Key Sequences #1
This panel contains inbound control sequences which are sent from the display to LINCS.
Modify Display/User Defined 1 LINCS C8.2 Central Control
Inbound Key Sequences: Display to 1174
Primary Sequence Alternate Sequence
Attn: 01000000000000 Attn: 00000000000000
Clear: 03000000000000 Clear: 00000000000000
Dup: 04000000000000 Dup: 00000000000000
Erase EOF: 05000000000000 Erase EOF: 00000000000000
FM: 06000000000000 FM: 00000000000000
Back Tab: 08000000000000 Back Tab: 1B090000000000
Tab: 09000000000000 Tab: 00000000000000
Newline: 0A000000000000 Newline: 1A000000000000
Cursor Up: 0B000000000000 Cursor Up: 1B5B4100000000
Cursor Down: 1B5B4200000000 Cursor Down: 00000000000000
Cursor Right: 0C000000000000 Cursor Right: 1B5B4300000000
Cursor Left: 1B5B4400000000 Cursor Left: 00000000000000
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
PF7 returns to the previous panel. PF8 displays the next panel #2 of 9.