Visara LINCS Central Control - Manual (Page 93)

87
Chapter 11. Device Menu
707024-002
() is displayed on the status row.
8. Press the Reset key, and entered characters are erased.
9. Using the cursor movement control keys, place the cursor in the Protected Intensified
Numeric field. Press any key. The cursor does not move, no characters are displayed,
and a Go Elsewhere error is displayed on the status row.
Press the Reset key to clear the error.
10. Using the cursor movement control keys, place the cursor in the Protected Unintensified
Nondisplay field. Press any alphabetic and/or numeric keys. The cursor does not move,
no characters are displayed, and a Go Elsewhere error is displayed on the status row.
Press the Reset key to clear the error.
Selector Pen Test
The Selector Pen test may be performed with an attached selector pen or, if one is not installed,
simulated with the keyboard. Please refer to the Terminal Test example panel to see the field
locations.
Selector Pen Actual
If you have a selector pen, follow these steps:
• Touch the pen on SELECTOR PEN in the Unprotected Unintensified field area. The
indicator changes to ? and will toggle with each touch of the pen.
• Touch the pen on ?SELECTOR PEN in the Protected Unintensified field area. The
indicator ? changes to >> and will toggle with each touch of the pen.
Selector Pen Simulated
Follow these steps for the Selector Pen Keyboard Simulation:
1. Press the Return key twice. The cursor moves to the beginning of the Unprotected
Unintensified Selector Pen field.
2. Press the Cursr Sel key. The indicator changes to ? and will toggle with each depression
of the Cursr Sel key.
3. Using the cursor movement control keys, place the cursor into the Protected
Unintensified Selector Pen field. Press the Cursr Sel key. The indicator ? changes to
>> and will toggle with each depression of the Cursr Sel key.
Display Device Status
The Display Device Status utility panel is a convenient source of displaying the status of
configured devices.
Coax, ASCII, and LAN device status’s are displayed by separate panels. PF8-Forw will scroll
you through the screens for the devices you have configured. For more information, see:
• Coax
• ASCII (ADA)
• LAN
The Display Devices Status panel provides information on the following items.
• Power-On Status
• Device Type
• File Transfer
• Status LU Indicators