Visara LINCS Central Control - Manual (Page 141)

135
Chapter 13. Communications Menu
707024-002
If the status is Not Active, the Node Type will always be LEARN.
If the status is Active, but no sessions are established, the Node Type will always be END.
This is true even if the adjacent node was configured as something else.
Status
Status displays the link status as active, inactive, pending-active or pending-inactive.
Sessions
Sessions displays the number of active sessions using this link.
Link Station Name
For dynamic circuits, the link station name starts with “@” character. For the predefined
circuits, the name starts with “LS”.
PF4-Start_All
This key starts all predefined links, and is only displayed when the utility is entered in update
mode. You can attempt to start all of the predefined circuits which have not been started,
which might be useful after stopping and starting the LINCS node.
PF5-Stop_All
This key stops all links, and is only displayed when the utility is entered in update mode.
You may want to stop all of the links to isolate a problem. You can also stop a specific circuit
from the Circuit Status/Details panel.
PF9-Restart
Redisplay this panel starting with the first entry.
APPN Circuit Status/Details
Circuit Status LINCS C8.2 Central Control
APPN Circuit: 0000
NETID: NETID001 CP Name: NETNODE1
Link Station Name: @I000001 Link Station Address: 0000 8370 4FA5 04
Port Name: PORT0000 Line: TRC1
DLC Name: DLC00029 TG Number: 021
Node Type: Network Link Station State: Active
CP-CP Session Support: Yes Active Sessions:
00004
HPR Support: Yes Lnk-Lvl Err Recovery: No
XIDs Received: 0000000010 Frames Received: 0000000040
XIDs Sent: 0000000012 Frames Sent: 0000000028
XID Errors: 0000000000 Frame Errors: 0000000000
Bytes Received: 0000001446 Bytes Sent: 0000012039
PF1: 1-Menu 3-Summary 8-Forw 9-Refresh
PF3-Summary returns you to the Circuit Status Summary panel.
Network ID
This is the network ID of the network.
CP Name
This is the control point name of the adjacent node.