Visara LINCS Central Control - Manual (Page 105)

99
Chapter 12. Event Logs Menu
707024-002
APPN Audits
This log displays the Audits recorded by the APPN feature when configured. Audits are logged
in chronological order, but upon entering the APPN Audits utility, the last Audit is displayed.
You can page forwards and backwards through the Audits log to display each Audit, one per
page. An example of what one of these Audits looks like is shown below.
APPN Audits LINCS C8.2 Central Control
Event Data
Beginning of Trace Buffer>
0000 APPN_Audit 05/24/05, 12:10.04, 4380432
Message 252:0 (from C:\DIAB\WORK\DCL$NOFINIT.C)
Node started
CP name (Alias) = VISARA.VIS1 (VIS1)
Node type = 02
Node info = LINCS Network Node, MTX, Inc.
PF: 1-Menu 8-Forw
Summary Counters
This log displays summary counters for 200 and 500 series errors for the host circuit that the
display viewing the panels is connected to. This is a good log to start with to get an idea of the
type of event codes being logged. For a more complete definition of the error codes listed,
refer to the LINCS Problem Determination Manual.
Summary Counters LINCS C8.2 Central Control
200 Summary Counters 500 Summary Counters
201_03 31 505_01 01
211_01 01 505_10 03
531_60 01
532_02 01
532_03 02
PF: 1-Menu
Clear All Summary Counters
Password protected. Selection 7 erases the summary counters. A 100-21 will be displayed in
the event log to indicate that the summary counters were cleared.
Clear All Event Logs
Password protected. Selection 8 erases the event logs. When the logs are cleared, Code 174-20
will be logged in the Event Log.