Visara SCON-20L Configuration Manual - Manual (Page 99)

707044-006 9-27
Chapter 9. Device Options
Default Printer Assignments
The default printer for a given display is:
• The first printer class that the display is authorized to print to, if the device is authorized
to print to any printer class.
• The display’s printer port, if the display is not authorized to print to any class, HAP
is enabled in the display’s device profile, and the HAP profile indicates that the
printer is local or shared.
• The first printer port which is configured as a local or shared printer, if HAP is not
enabled, and the display is not authorized to print to any classes.
You can reset the printer assignments to the default values at any time by pressing
PF9 - Default.
Printer assignment field
You must enter text in the data field to assign a printer to a display. Options are:
• All printer classes which have been defined in printer Device Profiles. A class
may be entered by typing C## (this is the same format as the printer ident field on
the status line of the display), or Class ##, where ## is a printer class number from
01-16.
• All defined printer ports which have been defined as local printers, including display
ports which have HAP configured.
• None, which indicates that the display will not be authorized to do local prints,
unless the display user idents to an authorized class or printer.