Visara SCON-20L Configuration Manual - Manual (Page 89)

707044-006 9-17
Chapter 9. Device Options
LAT Host Class Access
This feature is not supported on the SCON-2XL.
Printer Class Access
The matrix columns represent the sixteen Printer Classes. Setting the value to 1 under
column X allows displays in the profile to have access to Printer Class X. Printers are
assigned to Printer Classes on the Printer Device Profile panel.
Setting the value to 1 under the Dynamic Access column allows devices in the profile to
print to any printer, instead of only printers authorized by the chosen printer class(es).
Users can specify a local print to go to a printer class, or a specific printer. This is
accomplished by entering the printer port number in printer ident mode. For example,
one would go into printer ident mode and enter MCC1.004 to print to the printer attached
to coax port 4.
Global Sequence Access
The authorization matrix columns represent the 24 PF keys. Setting the value to 1
under column X allows devices in the profile to have access to the global sequence
defined by PFX.
Dynamic Access does not apply here.
Global Sequences are defined, deleted, and copied from local sequences on the Playback
Sequences menu accessible from the Customization Data menu.
Dynamic Access
The meaning for Dynamic access varies by the resource it is associated with. Please
select the resource you are interested in to see the Dynamic Access description.
Device Profile/ASCII Display
Device Profile 00/ASCII Display LINCS C8.2 Central Control
Display Emulation: Prompt
Keypad Mode: Application Mode
Inactivity Timeout: 0000
Synchronous Presentation: Disable
E/W Presentation Option: Disable
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
This panel appears only if you have the Incoming Telnet feature configured. A description
of the options on the panel are described below.