Visara SCON-20L Configuration Manual - Manual (Page 45)

707044-006 5-3
Chapter 5. Telnet Host Sessions
Disconnect Sequence
Enter this field and set up a character sequence, for example, LOGOFF(CR or ^M), that
is sent to the host before disconnecting an ASCII host session. You can enter up to 30
characters.
See Answerback Sequence for more information on the legal string characters.
Duplex
Options are: HALF and FULL
Translate Tables
Toggle to select Primary or Secondary.
This field lets you specify whether the language for this host is the Primary or Secondary
language. Primary and Secondary Languages are specified on the Language Options
panel.
Each time an end-user connects to an ASCII host using this profile, both the Translate
Tables and Keyboard Tables will be set according to the configured value. When a
secondary language has been configured, a user may press Exsel-L while in an ASCII
session to toggle both the Translate Tables and Keyboard Tables to the other language.
Terminal Emulation
This field defines the type of ASCII terminal to be emulated on a 3270 terminal, so the
3270 terminal can have a session with an ASCII host. This emulation is also used initially
if a TN3270 connection is being made to a server (NVT Mode). Choose one of the following:
• DEC VT52
• DEC VT1XX
• DEC VT2XX 7 bit
• DEC VT2XX 8 bit
• DG210
• DG410
• IBM 3101
• Printer
Timer Disc
This field specifies the number of minutes that a host can be inactive before the session
times out and automatically disconnects. Enter the number of minutes to wait before
inactivating a session, from 0 to 1440.