Visara SCON-20L Configuration Manual - Manual (Page 46)

5-4 707044-006
SCON-20L/22L/25L/28L Configuration Manual
Bold
Because a CUT mode terminal cannot support the bold attribute the same way an ASCII
terminal does, this field lets you select an EAB attribute that can be used in place of
bold. Toggle among the choices to select one of the following options:
• Normal (normal video default)
• Reverse video
• Underline
• Blinking
• White
• Red
• Blue
• Yellow
• Turquoise
• Pink
Character Set
To enable the use of multiple languages, LINCS supports Multinational Character Set
(MCS) inbound data (keys) and outbound data (displayable characters) and the National
Replacement Character Set (NRC) inbound and outbound data. Each device can use
one character set at a time.
• MCS - An ASCII character set that includes all 8-bit characters 00-FF hex. The MCS can
support all foreign languages without modification.
• NRC - The NRC is an ASCII character set that includes only 7-bit characters 00-7F hex.
To support foreign languages, the NRC is modified by replacing certain displayable
characters with those required by the foreign language.
The NRC tables are automatically modified for the language configured. The ASCII
Definition Utility (ADU), gives instructions for making custom modifications to the
NRC or MCS tables.
For a list of supported languages, see the table Languages Supported.
VT2xx Controls
Options are: 7 BIT or 8 BIT control characters. This field is ignored if terminal emulation
is not DEC VT2xx.