Visara SCON-20L Configuration Manual - Manual (Page 65)

707044-006 7-3
Chapter 7. Creating Print Server Queues
Implied CR
The setting of this parameter is used to determine whether LINCS is to add a CR into
the data stream before passing it to the printer.
Form Feed
This option allows you to indicate whether a Form Feed should be sent by LINCS after
the print job or not. The options are ‘After’ and ‘None’.
Profile
This value refers to an ASCII Session Profile (refer to the discussion in the Telnet Host
Sessions chapter, elsewhere in this document) that must be assigned to this definition.
The only use of the profile is to determine whether to use 7-bit ASCII or 8-bit ASCII
code tables when receiving the data. This needs to be coordinated with the clients that
are sending the print jobs.