Visara SCON-20L Configuration Manual - Manual (Page 98)

9-26 707044-006
SCON-20L/22L/25L/28L Configuration Manual
Device Profile Assignments Panel - ASCII Ports and LAN Ports
Device Profile Assignments/FET1 LINCS C8.2 Central Control
Device ------ Host Assignment At Power On (Hex LUs) ------
Port Prof A B C D E F G H I J
----- ------ ----- ----- ----- ----- ----- ----- ----- ----- ----- -----
000 00 00 000 01 000 02 000 03 000 * 3__ _ ___ _ ___ _ ___ _ ___ _ ___
001 00 00 ___ 01 ___ 02 ___ 03 ___ _ ___ _ ___ _ ___ _ ___ _ ___ _ ___
002 01 00 00F 01 00F 02 00F 03 00F _ ___ _ ___ _ ___ _ ___ _ ___ _ ___
Besides displaying coax ports, the Device Profile Assignments panel will display
Network ports on the Ethernet adapters, if Telnet displays or LAN printers have been
previously defined on the Network Device Definitions panel. Only the ports enabled
will be displayed. Host assignments can be made, using the same notations as used for
the coax devices.
Printer Assignments Panel
Printer Assignment LINCS C8.2 Central Control
Display Printer Display Printer
———— ———— ———— ————
MCC1.000 None FET1.000 None
MCC1.001 None FET1.001 None
MCC1.002 None FET1.002 *
MCC1.003 None
MCC1.004 None
MCC1.005 None
MCC1.006 None
MCC1.007 None
MCC1.008 *
MCC1.009 None
MCC1.010 None
MCC1.011 None
MCC1.012 None
MCC1.013 None
MCC1.014 None
MCC1.015 None
* = device is a printer, or undefined
PF: 1-Menu 7-Forw 8-Back 9-Default 10-Done
The Printer Assignment Panel will appear only if one or more Printer Profiles have
been created, and assigned to one or more ports. This panel defines which printer a
local print job will be directed to if the user on a particular port presses the print key.
Initially, all device ports on the panel will show a printer assignment of either None or
an asterisk (*). If the Default key is pressed, all display ports will be assigned
printers according to the description below. Printer ports are identified with the asterisk.