Visara SCON-20L Configuration Manual - Manual (Page 77)

707044-006 9-5
Chapter 9. Device Options
Tripad Keyboard Selection
Toggle among four options to choose the 88-key layout to be used with keyboards
having the tripad ID switch setting:
• Standard C3 Layout (default)
• C3 w/NUM Lock
• International C8 WITHOUT NUM Lock
• International C8 w/NUM Lock
88-key APL Keyboard
The choices in this field allow the selection of either the standard APL layout or the
special (C3) APL layout with and without numeric lock for APL keyboards. Toggle
among the following three options:
• Standard APL Layout (default)
• C3-APL WITHOUT NUM Lock IBM RPQ-8K1158
• C3-APL w/NUM Lock IBM RPQ-8K1158
Device Options/DFT Panel
Device Options/DFT LINCS C8.2 Central Control
DFT Local Copy Format: Do Not Send Format Controls
DFT Local Copy Form Feed: No Form Feeds
3290 Field Intensity: Underscore
3290 Update Panel: Process Host Data BEFORE Displaying Panel
3290 DFT Password: ______________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
Options on this panel generally affect only IBM 3290 terminals. If you are not using the
3290 plasma displays, you can ignore this panel.
Note: 3290 terminals, when used with the SCON-2XL should be limited to using all
sessions with the same Host Circuit (LPAR). Attempting to use the 3290 to
communicate to multiple LPARs at the same time could result in losing
communication to all sessions (5xx error in status line) if one LPAR becomes
unavailable.
To support 3290 terminals requires that the DSL (Downstream Loadable) files required
by the device be copied to the SCON-2XL System Directory on the hard drive by either
using the Media Management File Copy utility, or by sending the file via FTP. These
files should have been provided by the vendor of the 3290 device.
Note: For information on 3290 configuration options, refer to the IBM document
3290 Information Panel: Description and Reference, GA 23-0021.