Visara SCON-20L Configuration Manual - Manual (Page 123)

707044-006 A-7
Appendix A. RPQs
will be display most briefly if at all. Only if the host does not write to the screen and if
the device is capable of displaying NVT messages once in binary mode, does this RPQ
provide useful information.
Allow alphanumeric input on TN3270 Connect panel
With this RPQ enabled, you can specify 3270 Host Class names, and specify a specific
‘Host,Address’ combination. Without the RQP enabled, you are limited to entering the
Class Number of what you want to connect to.
Suppress the automatic CLEAR key when connecting to a Shared Session
Normally, a CLEAR key is automatically generated to refresh the console screen to a
user when connecting to a Hot Session, but when the session is also to be shared this
may not be desirable. This RPQ allows you to suppress the automatic CLEAR key.
During TN3270E negotiation, always tell client what LU was assigned
Normally, LINCS only tells the client which resource was assigned, only if the client
requests a specific resource. With this RPQ enabled, LINCS will always tell the client
which resource was assigned. (This is required to make the Passport client work
correctly.)