Class name – Visara SCON-20L Configuration Manual User Manual
Page 41
707044-006
4-3
Chapter 4. Host Circuits
rather than actual addressing. For example, if the range of addresses assigned to ESCON
CU 0 were from 14 to 27, the first address of CU 0 would still be referred to as address
00 on this panel. Likewise address 15 would be referred to as address 01 on this panel.
The entire range would be relative addresses 00-13, representing the CU defined address
range of 14-27. A setting on the General Options panel determines whether the values
are displayed in decimal or hexadecimal.
Class Name
This field allows you to assign a 16 character name to the class. This name may be used
to connect to the class on the 3270 Connect Screen, and will appear as a toggle option
for the Host Assignments at Power On field on the Device Profile/Host Assignments
panel. Note that Class Names are always saved as uppercase. Workstations and PCs
that will refer to the Class Name must match exactly.