Visara SCON-20L Configuration Manual - Manual (Page 91)

707044-006 9-19
Chapter 9. Device Options
Synchronous Presentation
For devices that are slow to update, LINCS will discard earlier screens, and draw the
latest one. An example of this is if a user hits “next screen” fast 5 times. The user really
wants to see the 5th screen, so LINCS won’t draw the intervening screens.
DISABLE will activate this software, to get the user to the latest of a series of
screens faster.
ENABLE of this option defeats LINCS’ optimization of screen updates for a flow of
fast screens. That is needed for instances where every screen buffer must be drawn
fully, such as ASCII file transfer.
E/W Presentation Option
ENABLE of the Erase/Write Presentation Option will cause LINCS to ignore “clear
screen” commands from the host. When LINCS draws the next screen buffer, it
always only updates what has changed. With this option enabled, it ensures that is
always the case. This option is especially useful in making ASCII terminals act
more like 3270 terminals.
DISABLE passes the “clear screen” commands unaltered.
Device Profile /Printer Panel
Device Profile 01/Printer LINCS C8.2 Central Control
0 1
1234567890123456
Printer Mode: Shared ----------------
Print Buffering: Enable Printer Class Assignment: 1000000000000000
ASCII PRINTER OPTIONS
Printer Emulation: Generic Printer Buffer Size: Mod 2
Form Feed Support: Disable LU3 Null Suppression: Disable
Forms Width: 132 Printer Character Set: NRC
Forms Length: 066 Local Print Form Feed: After
Count 2nd Transparent Order: Disable
SCS Transparent Data Xlate: Disable
LU1 Protocol Enveloping: Disable
Enveloping Delay After CR: 000
Enveloping Delay After FF: 000
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
Options for the Device Profile/Printer panel are described below.