Visara SCON-20L Configuration Manual - Manual (Page 96)

9-24 707044-006
SCON-20L/22L/25L/28L Configuration Manual
Device Profile
A data entry field used to assign a Device Profile number to the port. When initially
displaying the panel, the first defined Device Profile will be assigned to all ports. Pressing
PF9 - Default will not change the value of this field.
Host Assignment At Power On A-J
Ten pairs of columns representing the 10 possible sessions of a CUT device, displays
the configured session assignments for each coax, Telnet, and LAN printer device. You
may modify the host assignment for any port if you wish.
Pressing PF9 - Default will default the fields to the Host Assignments defined in each
device’s Device Profile, but not the value in the Device Profile column.
Note that a specific 3270 LU may be assigned to multiple devices. This may be useful
if a given user has two terminals (for example one at his/her desk and one in some other
location) and needs the same Host Assignments at each location. By powering off the
terminal in one location, the host resources will be made available for the terminal in
the other location, assuming that the Power Off Action field in the Device Profile is set
to Disconnect All Sessions.
Host Assignment Fields
There are two sets of symbols that are used in the Host columns, depending on the
released version of LINCS. You can distinguish between the versions by looking near
the bottom of the screen for key starting with ‘(00-7F)’. If you do not find this key, then
you are dealing with the original version of the LINCS key. If you do find this key, then
you must use the modified key.