Visara SCON-20L Configuration Manual - Manual (Page 58)

6-4 707044-006
SCON-20L/22L/25L/28L Configuration Manual
• Client+CC ID: When this entry is used, the client must provide its own Command
Chaining datastream handling, and the user must provide a valid User ID and
password, as described in the following section on the ‘nickname.sys’ file.
• VisaraNCT ID: This definition is restricted to TN3270 clients running on Visara
NCTs and other LINCS platforms. In this instance, the user must provide a valid
User ID and password when establishing their connection.
3270 Host
This optional field toggles to DISABLE and through all 3270 Hosts and 3270 Host
Classes. If this field is set to DISABLE and a TCP port number has been defined for
this entry, the user will be prompted at connect time for a host or host class using Telnet
NVT ASCII data. A menu of all available configured host class resources will be painted
on the client’s screen.
LU
The 3270 LU field is required if the 3270 Host field contains a 3270 Host entry. If the
3270 Host field is DISABLE, then this field is ignored.
Example Entries (from previous panel)
Entry 1
Line Port IP Address Type 3270 Host LU
---- ---- ---------- ---- --------- --
FET1 00983 207 015 182 113 VisaraNCT PW OS390_prod4 06
This entry provides a session (address 06 for host “OS390_prod4” to a 1683/1783/1883
device or LINCS platform (SCON-25L or 1174) with an address of 207.15.182.113
only. The client must connect to the 2XL on incoming port 983. The client will be
challenged for the password.
Entry 2
Line Port IP Address Type 3270 Host LU
---- ---- ---------- ---- --------- --
FET1 01067 207 015 182 117 VisaraNCT PW VMESA_prod3 06
This entry provides a session (address 06 for host “VMESA_prod3” to a 1683/1783/
1883 or LINCS device with an address of 207.15.182.117 only. The client must connect
to the 2XL on incoming port 1067. The client will be challenged for the password.