Visara SCON-20L Configuration Manual - Manual (Page 67)

707044-006 8-1
Chapter 8. Network Device
Definitions
The Network Device Definitions panel is used to define Telnet clients and LAN printers
to the LINCS operating system used by the SCON-2XL. The appearance of the panel
varies greatly depending on what type of device you are defining. Toggling the Device
Type field will cause the appropriate options to appear for the device type selected.
The number of network devices that are supported by the SCON depends on the
model and whether the Telnet FAD is installed. The SCON-20L supports a maximum
of 16 network devices. The SCON-22L supports a maximum of 32 network devices.
The SCON-25L and SCON-28L both support up to 32 network devices without a
Telnet FAD, and up to 256 network devices (maximum of 128 per FET card) with the
FAD installed
Network Device Definition Panel - Ethernet, Telnet Display
Network Device Definition 002 LINCS C8.2 Central Control
LAN Line: FET1 Device Type: TELNET Display
0 1 2 3 4 5 6
123456789012345678901234567890123456789012345678901234567890123
Ports: 01000000000000000000000000000000000000000000000000000000000000
In Use: 10000000000000000000000000000000000000000000000000000000000000
7 8 9 10 11 12
4567890123456789012345678901234567890123456789012345678901234567
Ports: 00000000000000000000000000000000000000000000000000000000000000
In Use: 00000000000000000000000000000000000000000000000000000000000000
TCP Port: 06191
IP Address or Name: 201.56.91.11________________
PF: 1-Menu 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done