Tn3270 client definition panel, Tn3270 client definition panel -2, Line – Visara SCON-20L Configuration Manual User Manual
Page 56

6-2
707044-006
SCON-20L/22L/25L/28L Configuration Manual
reason, it is good practice to define specific LU assignments earlier in the table than
pooled resource assignments.
Likewise, when using a nickname file to assign resources the nickname file is searched
from the beginning until the first match is found.
The TN3270 Client Definition Panel is displayed if TN3270 Client Connections are
configured on the TCP/IP Options panel for one or more network interfaces.
Note that you can have more TN3270 Client Definitions than the number of TN3270
Sessions specified on the TCP/IP Line Options panel for a specific network interface.
The number configured for a specific line however, will limit the number of concurrent
connections.
TN3270 Client Definition Panel
TN3270 Client Definition Panel 000 LINCS C8.2 Central Control
Line
Port IP Address Type 3270 Host
LU
FET1
00983 207 015 182 113
VisaraNCT PW
OS390_prod4
06
FET1
01067 207 015 182 117
VisaraNCT ID
VMESA_prod3
06
FET1
01187 207 015 182 119
Client PW
OS390_prod4
07
FET1
00224 ___ ___ ___ ___
VisaraNCT
3270 Class: TN3270E_CLIENTS
__
FET1
00225 207 016 182 000
Subnet
3270 Class: TN3270E_TEST
__
FET1
00227 207 015 182 121
VisaraNCT PW
Disable
__
FET1
01191 ___ ___ ___ ___
Client ID
3270 Class: ZOS_PROGRAMMERS
__
FET1
02120 ___ ___ ___ ___
Client+CC PW
OS390_prod4
03
FET1
02121 ___ ___ ___ ___
Client+CC ID
OS390_prod4
04
FET1
02122 207 015 182 137
Client+CC
VMESA_prod3
02
FET1
_____ ___ ___ ___ ___
Client
Disable
__
FET1
_____ ___ ___ ___ ___
Client
Disable
__
FET1
_____ ___ ___ ___ ___
Client
Disable
__
FET1
_____ ___ ___ ___ ___
Client
Disable
__
FET1
_____ ___ ___ ___ ___
Client
Disable
__
FET1
_____ ___ ___ ___ ___
Client
Disable
__
PF: 1-Menu 3-Auto 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
A summary of the options for the above panel can be found below. Afterwards there is
a discussion of the specific example shown.
Line
This field toggles through all Ethernet boards that have TCP/IP enabled and TN3270
Clients defined.