Visara SCON-20L Configuration Manual - Manual (Page 43)

707044-006 5-1
Chapter 5. Telnet Host Sessions
The SCON-25L and SCON-28L support up to 32 Telnet Host Sessions (expandable to
256 with a Telnet FAD). These sessions can be used by coax terminals and Telnet
clients to access a Telnet Host Server or TN3270 Server (such as another SCON-2XL).
Emulations provided include DEC VT52, VT100, VT2XX, DEC DG210, DG410, IBM
3101, Printer, and TN3270/TN3270E. To configure this feature you must first configure
a number for ‘Telnet Host Connections’ on the Line Options/FET Configuration Panel.
Then you will be required to configure one or more ASCII session profiles and one or
more IP host classes. Finally you will need to authorize devices to have access to these
sessions and assign Telnet Host Sessions to the desired coax and Telnet clients.
ASCII Session Profiles
The ASCII Session Profiles panels are used to configure options for Telnet Host sessions.
ASCII Session Profiles are assigned to Host Classes on the IP Host Classes panels and
on the TCP/IP LAN Print Server Classes panel. When a session connects to an IP the
Profile assigned to the class connected to will be used. Alternately, you can change the
ASCII Session profile on the Connection panel.
ASCII Session Profile 01
ASCII Session Profile 01 LINCS C8.2 Central Control
Profile Name: ________
Answer Back Sequence: ________________________________
Disconnect Sequence: ________________________________
Terminal Emulation: DEC VT2xx Timer Disc: 0000
Translate Tables: Primary Bold: Normal
Character Set: NRC VT2xx Controls: 7 bit
Tab Motion: Direct Auto Wrap: Disable
Newline: Disable Cursor Keys: Normal
Keypad Mode: Numeric Numeric Keypad: Decimal
Cursor: Enable Margin Bell: Disable
Formfeed: Linefeed Column Change: Preserve
3101 Turnaround Char: CR 3101 CR Key: CR
3101 Scroll: Off
Break Time (msec): 300 Duplex: Full
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
Most of the options on this panel are used for asynchronous emulations only. If you are
configuring for TN3270 you can leave these options defaulted.