Visara SCON-20L Configuration Manual - Manual (Page 47)

707044-006 5-5
Chapter 5. Telnet Host Sessions
Tab Motion
Options are DIRECT or SPACE FILLED tabs. SPACE FILLED causes tab characters
to be executed as though they consisted of the appropriate number of space characters.
Auto Wrap
Options are:
• ENABLE causes the cursor to move to the first position of the next line when a character
is entered in the last position of a line.
• DISABLE allows a character to be entered on the last position of a line, at which point
the cursor will stop. The user must then manually move the cursor to the next line, in
order to continue entering characters.
Newline
Options are:
• DISABLE allows carriage return and line feed characters be processed independently.
• ENABLE causes a carriage return or a line feed to be interpreted as a carriage return
followed by a line feed.
Cursor Keys
Options are:
• NORMAL causes the cursor keys to generate standard ANSI control codes that correspond
to Cursor Up, Cursor Down, Cursor Left and Cursor Right.
• APPLICATION causes the cursor keys to generate escape sequences defined by
the application mode. See ASCII Keyboard Codes for more information about
escape sequences.
Keypad Mode
Options are:
• NUMERIC is the default, where the numeric keypad keys generate ASCII characters
that match the numeric characters, comma, period and minus sign keys. Control functions
are generated by the PF1 through PF4 keys.
• APPLICATION causes the keypad to generate the escape sequences defined by the
application mode. See “VT1xx/VT2xx ANSI Mode Control Sequences”.
Note that the application that you are connected to may define which mode the keys
will be in.