Visara SCON-20L Configuration Manual - Manual (Page 93)

707044-006 9-21
Chapter 9. Device Options
Forms Length
This is a data entry field. Enter any value between 001 and 255 lines. The default
value is 66 lines.
Printer Buffer Size
This field lets you select an ASCII printer buffer size for local prints that corresponds
with the mod size of the transmitting coax terminal.
Toggle to select one of the following: Mod 2, Mod 3, Mod 4, or Mod 5.
LU3 Null Suppression
This option suppresses any line that contains only null characters, eliminating an
extra line return. Toggle to ENABLE or DISABLE the feature. The default setting
is DISABLE.
Printer Character Set
To enable the use of multiple languages, LINCS supports 8-bit Multinational
Character Set (MCS) inbound data (keys) and outbound data (displayable characters)
and the 7-bit National Replacement Character Set (NRC) inbound and outbound
data. Each device can use one character set at a time.
Local Print Form Feed
Choose one of the following options:
• None - No automatic form feed will be performed
• Before - A form feed will be done before each local print
• After - A form feed will be done after each local print
• Before and After - A form feed will be done before and after each local print
Count 2nd Transparent Order
Setting this option to Enable causes the secondary transparency start order, stop order,
and data within the order to be counted as positions on a row, which is desirable if the
datastream uses Set Buffer address (SBA) orders, but it means that 80 columns (or 132)
are not supported on the row using the order.
SCS Transparent Data Xlate
This option allows you to determine whether transparent data (control codes, escape
codes, and other non-text related data) transmitted to the printer is converted to ASCII
before transmission. Toggle to select one of the following:
• DISABLE (default) - Select this option if the data to be transmitted is valid
ASCII data.