Coax multiplexing panel, Coax multiplexing panel -7, Chapter 9. device options – Visara SCON-20L Configuration Manual User Manual
Page 79
707044-006
9-7
Chapter 9. Device Options
Coax Multiplexing Panel
Coax Multiplexing
LINCS C8.2 Central Control
Method of Connection
on MCC1:
16 Port MUX on Port 0
MCC2:
Standard
MCC3:
Standard
MCC4:
Standard
Dynamic Multiplexing:
Disable
Coax Poll Rate:
Enhanced
Automatic Coax Recovery:
Disable
PF: 1-Menu
7-Back
8-Forw
9-Default
10-Done
Options on this panel affect support of the coax devices. Enabling options on this
panel incorrectly could affect whether or not you are able to access the 2XL, once the
configuration has been changed and the unit IML'd from a coax device connected to
a port prior to the changes. If this occurs, you can re-IML and press the
button at state 500, to force the 2XL to boot on the default configuration. This will
allow you to reconfigure the last saved configuration (the "Drive C" option) when
entering the configuration utility, to correct the situation.
A description of the options on this panel can be found below.
Method of Connection
The SCON-2XL has a single MCC function (MCC1) in spite of the reference to four
MCCs. The toggle field choices for the MCC1 are as follows:
• Standard (default) - Devices will be connected using one of the following
standard methods:
• direct connect to CDA ports via coax or twisted pair (using a balun)
• 8 port multiplexer attached to one of the multiplexer ports (0, 8, 16, 24)
• 32 Port Coax Multiplexer - includes coax and twisted wire versions of the multiplexer
• 32 Port Fiber Optic Multiplexer - (option is not offered on the SCON-2XL)
• 32 Port Twisted Wiring Adapter - (option is not offered on the SCON-2XL)
• 16 Port MUX on Port 0 and Port 16 - allows attachment of two 16-port multiplexers,
connecting them to Ports 0 and 16.
• 16 Port MUX on Port 0 - Allows attachment of one 16-port multiplexer to Port 0.
Ports 16-31 are handled the same as the standard setting.
• 16 Port MUX on Port 16 - Allows attachment of one 16-port multiplexer to Port 16.
Ports 0-15 are handled the same as the standard setting.