Creating a configuration backup using emanager, Creating a configuration backup using ftp configur – Visara SCON-20L Configuration Manual User Manual
Page 116
12-2
707044-006
SCON-20L/22L/25L/28L Configuration Manual
Creating a Configuration Backup Using FTP Configuration Complete Panel
Using an FTP client of your choice, connect into the SCON through the FET interface
(interface must be configured for network access of course) using the User ID of ‘system’,
and give the configured Supervisor Password, for your password. Next copy off the
following two files: FIG$DATA.LOA and DOD$CFG.LOA. Make sure that you transfer
the files in binary mode (not text mode). These files make up and are equivalent to the
Configuration Data Object. In order to read them into a SCON through the floppy
drive, you must put them on a System 1 disk or at least a floppy with the volume label
of ‘@@D@@@@@174’.
Creating a Configuration Backup Using eManager
If you have a copy of the Visara management software, eManager, you can make a
backup of the configuration of your SCON. Select the node corresponding to the SCON
that you wish to backup, right-mouse-click to bring up the menu, and select ‘Backups/
Create Backup’. Please reference the eManager documentation for more details on this
procedure.