Visara SCON-20L Configuration Manual - Manual (Page 103)

707044-006 10-3
Chapter 10. Feature Memory Allocation
Attached Processor
This is a protected field which indicates the amount of feature memory required when
the Attached Processor Feature is enabled on the RPQ panel. The AP Feature allows an
application program running on an AP (an asychronous host connected to an AT&T
6544 Controller) to control synchronous and asynchronous windows of AT&T’s 6538
and 6539 displays. For more information, refer to the 6544 Controller AP Feature
Technical Reference manual.
Extended (over 512) 3270 LUs Feature
This feature does not apply to the SCON-2XL.
5550 Printer Sharing
This is a protected field. If the 5550 Printer Sharing RPQ is enabled, 128K of feature
memory is required.
LPD Print Servers
A small amount of memory is set aside to keep track of print jobs. When the 2XL is
configured to receive print jobs from the network for printing on coax printers, typically
16K, the amount is determined by LINCS and cannot be changed.
LPD Printer
This field displays the amount of feature memory LINCS will allocate for all LPD
printers. You allocated Feature Memory for each LPD printer when you defined them
on the Network Device Definition panels. LPD printers require feature memory to buffer
prints that LINCS receives as it sends the data to the LPD print server
See Overview of LAN Printers for more information on LPD Printers.
Local Format Storage
This feature does not apply to the SCON-2XL.
Central Site Customization
This is a protected field. 512KB of memory is required if Central Site Customization is
enabled on the General Options panel.
Presentation Space Storage
This is a protected field which displays the memory available for Presentation Space
Storage. The memory is used to maintain screen images for the following features. See
Calculating Presentation Space Storage for more information on the above features.