Visara SCON-20L Configuration Manual - Manual (Page 35)

707044-006 3-9
Chapter 3. Line Options
SNMP Read Authentication String
This 16-character string is required by the Network Management Station (the SNMP
client) to access MIB variables in LINCS. If not configured, the default value of ‘public’
is used.
SNMP Write Authentication String
This 16-character string is required by the Network Management Station (the SNMP
client) to modify MIB variables in LINCS. If left blank, LINCS will default the string
to ‘public’.
TCP/IP Options Panel
TCP/IP Options LINCS C8.2 Central Control
LPD Printer Username ________________________
LPD Server/Printers Drive: None
SNMP OPTIONS
System Location: ________________________
________________________
System Contact: ____________________________________
System Name: ____________________________________
TN3270 SERVER OPTIONS
TN3270E: Enable ATTN Key: Disable
SYSREQ Key: Disable 3270 Translate: Disable
Keepalive/Timeout Method: Keepalive using Telnet NOP
Keepalive/Inactivity Timer (min): 05 Disconnect on UNBIND: Disable
Telnet Disconnect on UNBIND: Disable
SESSION MANAGEMENT SYSTEM
SMS Server: None SMS Client: Disable
Poll Rate (secs): 0005
Domain Name: ________________________________________________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
Many of the options on this panel are not used by the SCON-20L and SCON-22L, but
are supported by the SCON-25L and SCON-28L and will appear if TCP/IP protocol
has been selected for the FET board. A description of the options follows.
LPD Printer Username
The LPD Printer Username is used to identify the user who requested an LPD print in
LPD print requests sent to an LPD Print Server, and may be printed on the banner page.
If left blank, it will default to LINCS.