Visara SCON-20L Configuration Manual - Manual (Page 62)

6-8 707044-006
SCON-20L/22L/25L/28L Configuration Manual
3. The address portion of the notation is a two digit hex value, and is offset from 00,
regardless of what the actual addresses are, being used on the channel. (For example
if the address range of A0-A7 is being defined on the host, the 2XL will refer to the
range as 00-07 when assigning resources.)
4. The resource listed can be the name of a 3270 Host Class.
5. Entries are separated by a CR/NL in the file. A blank line will be interpreted as the
end of the file.
6. At least one valid port must be defined for use on the TN3270 client definition
panel. LINCS will only listen on TCP ports defined on the TN3270 Client Definition
panel for connecting TN3270 clients.
7. The nickname file is not associated with any particular network adapter. This can
simplify the configuration when using the SMS feature to balance user connections
across multiple network interfaces.
8. By including the line ‘sensitive=yes’ as the first line of the nickname file, the
remaining entries are treated as case sensitive.