Dixon Aficio 1515 - Manual (Page 992)

Quick Dial
41
3
JJJJ
Press the {{{{Clear/Stop}}}} key, and then
reenter the destination name.
Note
❒ Under rare circumstances, gar-
bled characters may appear
during name registration if you
use the
{{{{Pause/Redial}}}} key to
display the fax number of par-
ties located in other countries. If
this happens, simply delete the
garbled characters using
0 or
1 and the {{{{Clear/Stop}}}} keys,
and then go on to enter the
name.
KKKK
Press the
{{{{OK}}}} key.
The name is programmed.
LLLL
Press
0 0 0 0 or 1 1 1 1 to select either "On"
or "Off".
Note
❒ Label insertion allows the re-
c e i v e r ' s n a m e t h a t i s p r o -
gram m ed in Quick Dial or
Speed Dial to be printed on the
fax when it is received at the
other end. See Chapter 1 “Label
Insertion” in the Advanced Fea-
tures manual.
MMMM
Press the {{{{OK}}}} key.
If you want to store another Quick
Dial, go to step
E.
NNNN
Press the {{{{User Tools}}}} key to re-
turn to standby display.
Deleting
The following procedure describes
how to delete fax numbers registered
in Quick Dial keys.
Limitation
❒ When a Quick Dial key is being
used for a standby Memory Trans-
mission, the message "
This Dial
is in Use. Cannot Delete. " is
shown and you cannot delete the
destination for this key.
AAAA
Press the {{{{User Tools}}}} key.
BBBB
Press 0 0 0 0 or 1 1 1 1 until " 4. Fax Fea-
tures " is displayed.
CCCC
Press the
{{{{OK}}}} key.
Confirm that " 1. Program / Delete
" is displayed.
DDDD
Press the {{{{OK}}}} key.
StellaCEN-basic_V4_FM.book Page 41 Thursday, July 19, 2001 1:39 PM