Dixon Aficio 1515 - Manual (Page 979)

Faxing
28
2
AAAA
Make sure that the machine is in
standby mode.
BBBB
Set your original and select any
scan settings you require.
CCCC
Press the Quick Dial key in which
the destination's number is pro-
grammed.
If the destination's name has been
stored, the name is shown on the
display. If it is not, the fax number
is shown.
Note
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key and try again.
❒ If you wish to dial another des-
tination, press the {{{{OK}}}} key and
dial another fax number.
DDDD
Press the {{{{Start}}}} key.
Using Speed Dials
You can specify destinations simply
by pressing the
{{{{Speed Dial}}}} key and a
Speed Dial code (00 to 49).
You must store the destination's fax
number in a Speed Dial beforehand.
Additionally, you can store a name
for the destination in Speed Dials.
Note
❒ To register, edit, or delete Speed
Dial entries, see p.44 “Speed Dial”
❒ To check the contents of all Speed
Dials, print the Speed Dial list. See
Chapter 5, “Printing Reports/Lists”
in the Advanced Features manual.
❒ You can use codes 00-49 for Speed
Dials.
❒ If a search letter is registered with
a Speed Dial, you can find this
number quickly using the Tele-
phone Directory function. See
Chapter 3 “Telephone Directory”
in the Advanced Features manual.
❒ You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
AAAA
Make sure that the machine is in
standby mode.
BBBB
Set your original and select any
scan settings you require.
StellaCEN-basic_V4_FM.book Page 28 Thursday, July 19, 2001 1:39 PM