beautypg.com

Dixon Aficio 1515 User Manual

Page 659

background image

Remote Maintenance by telnet

89

9

Note

❒ To specify TCP/IP protocol, en-

ter “ip” followed by a space,
and then the IP address.

❒ To specify the IPX/SPX proto-

col, enter “ipx” followed by a
space, and then the IPX address
followed by a decimal, and then
the MAC address of the net-
work interface board.

The following is a sample configu-
r at i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IP address
192.168.15.16:
msh> snmp 3 ip
192.168.15.16

The following is a sample configu-
r at i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IPX address
7390A448, and the MAC address
00:00:74:62:5C:65:
msh> snmp 3 ipx 7390A448:0000

IPP

Use the “ipp” command to configure
IPP settings.

Viewing setting

The following command displays
the current IPP setting:

msh> ipp
Example output:

timeout=900(sec)
auth=off

• The “timeout” setting specifies

how many seconds the compu-
ter keeps trying to access the
network printer to send print
jobs if no connection can be
made.

• The “auth” setting indicates the

user authentication mode.

IPP timeout configuration

Specify how many seconds to wait
before canceling a print job if it has
been interrupted for some reason.
The time can be from 30 to 65535
seconds.

msh> ipp timeout
{30 - 65535}

IPP user authentication configuration

Use IPP user authentication to re-
strict printing with IPP to certain
users. The default is “off”.

msh> ipp auth
{basic|digest|off}

• “basic” and “digest” are user

authentication settings.

• “off” removes the user authenti-

cation.

Note

❒ If you select “basic” or “digest”,

see next section “Configuring
IPP user authentication” for
how to configure the user name.
Up to ten user names are availa-
ble.

Configuring IPP user authentication

Use the following command:

msh> ipp user
The following message appears:

Input user number (1 to 10):
Enter the number, user name, and
password.

IPP user name:user1 IPP
password:*******
After configuring, the following
message appears:

IPP configuration changed.