Transmission mode, Sending at a specific time (send later) – Dixon Aficio 1515 User Manual
Page 457
3
1. Transmission Mode
Sending at a Specific Time (Send Later)
Using this function, you can instruct
the machine to delay transmission of
your fax message until a specified lat-
er time. This allows you to take ad-
v a n t a g e o f o f f - p e a k t e l e p h o n e
charges without having to be by the
machine at the time.
If you have a non-urgent fax, select
Send Later when you scan it. Faxes
will be queued in memory and sent
during Economy Transmission Time.
Important
❒ After the machine has been
switched off for about one hour, all
fax messages stored in memory are
lost. If messages are lost for this
reason, a Power Failure Report is
automatically printed when the
main power switch is turned on.
Use this report to identify lost mes-
sages.
Limitation
❒ This function is unavailable with
Immediate Transmission. Use
Memory Transmission.
Note
❒ You can specify a time within the
next 24 hour period.
❒ If the current time shown is not
correct, change it. See “Timer Set-
tings”, General Settings Guide.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.11 “Placing Originals”, Fac-
simile Reference
Reference
BBBB
Press [TX Mode].
CCCC
Select [Send Later] using
{{{{U
U
U
U}}}} or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}} key.
DDDD
Select [Send at specified time] using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and then press the
{{{{OK}}}} key.
StellaC2-AEcombine-F_FM.book Page 3 Tuesday, January 13, 2004 1:22 PM