Dixon Aficio 1515 - Manual (Page 623)

Printing with NetWare
53
5
Printing with NetWare
This describes how to configure the
machine for use as a print server or
remote printer in a NetWare environ-
ment.
This section assumes NetWare is
functional and the necessary environ-
ment for the NetWare print service is
available.
Note
❒ NetWare must be set to active us-
ing the control panel. For more in-
formation about how to set it, see
p.15 “Setting Up the Machine on a
Network”.
❖ ❖ ❖ ❖ SmartDeviceMonitor for Admin
To use a printer in a NetWare envi-
ronment, configure the NetWare
p r i n t i n g e n v i r o n m e n t u s i n g
SmartDeviceMonitor for Admin.
Note
❒ If you configure NetWare print-
ing using SmartDeviceMonitor
for Admin under the following
environments, NetWare Client
from Novell is required:
• NDS mode in Windows 95/
98/Me
• NDS or Bindery mode in
Windows 2000/XP, Win-
dows Server 2003, Windows
NT 4.0
❖ ❖ ❖ ❖ Printers listed by SmartDeviceMoni-
tor for Admin
SmartDeviceMonitor for Admin
displays a list of printers that are
connected to the network.
If you cannot find the printer from
the displayed list, refer to the con-
figuration page printed from the
machine. For more information
about printing a configuration
page, see Printer Reference 2.
Setting Up as a Print Server
NetWare 3.x
AAAA
Log on to the file server as a Su-
pervisor, or equivalent.
BBBB
Start SmartDeviceMonitor for
Admin.
CCCC
On the [Group] menu, point to
[Search Device]
, and then click
[IPX/SPX] .
A list of machines appears.
DDDD
In the list, select the printer for
which you want to change config-
uration.
EEEE
On the [Tools] menu, click [NIB Set-
up Tool]
.
NIB Setup Tool starts.
FFFF
Click [Wizard], and then click [OK].
GGGG
If necessary, enter the print server
name in the [Device Name:] box,
and then click [Next >].
Install the NIB Setup Tool
Print Server Remote Printer
NetWare Basic Procedure
Configure the network interface board
Configure the NetWare
Start the print server
Restart the printer