Dixon Aficio 1515 - Manual (Page 767)

Other Functions
31
2
Other Functions
User Codes
When user codes are set, operators
must enter their user codes before the
machine can be operated. The ma-
chine keeps count of the number of
copies made under each user code.
Note
❒ When user codes are set, the ma-
chine will prompt you for your
user code after the power switch is
turned on or Copy Reset Timer
comes into effect.
❒ To prevent others from making
copies using your user code, press
the
{{{{Clear Modes}}}} and {{{{Clear/Stop}}}}
keys simultaneously after copying.
Reference
For details about user codes, see
p.54 “Settings You Can Change
with the User Tools”.
Setting the User Code
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press the 0 0 0 0 or 1 1 1 1 key to display
“3. Copier Features”, and then
press the
{{{{OK}}}} key.
CCCC
Press the 0 0 0 0 or 1 1 1 1 key until “7. Key
Op. Tools” is displayed, and then
press the
{{{{OK}}}} key.
DDDD
Press the 0 0 0 0 or 1 1 1 1 key until “7.
Program User Code” is displayed,
and then press the
{{{{OK}}}} key.
EEEE
Enter the desired user code with
the number keys, and then press
the
{{{{OK}}}} key.
StellaC1a-EN-CopyF_V4_FM.book Page 31 Wednesday, September 12, 2001 4:03 PM