Dixon Aficio 1515 - Manual (Page 133)

Placing Originals
15
1
Placing Originals
Note
❒ Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.13 “Originals” .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
❒ Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Placing Originals on the
Exposure Glass
AAAA
Lift the exposure glass cover or
ADF.
Important
❒ Do not lift the exposure glass
cover or ADF forcefully. If you
do, the ADF cover might open
or be damaged.
BBBB
Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1. Positioning mark
2. Left scale
Note
❒ Start with the first page to be
copied.
CCCC
Lower the exposure glass cover or
ADF.
Originals ADF Exposure
glass
ABU025S
StellaC2_GBcopy_F1_pre_FM.book Page 15 Tuesday, December 16, 2003 4:39 PM