Dixon Aficio 1515 - Manual (Page 402)

Faxing
30
2
Limitation
❒ Group Dial can be used for Memory
Transmission only; not Immediate
Transmission. If you specify Imme-
diate Transmission in Group Dial,
the "
Try again after switching
to memory transmission. " mes-
sage appears. When this happens,
press [Exit], and then switch to Mem-
ory Transmission.
Note
❒ To check the contents of Quick Di-
al, print the destination list. See
“Key Operator Tools”, General Set-
tings Guide.
❒ A stored name can be printed out
on the first page of a received fax at
the other end. See p.9 “Label Inser-
tion”, Facsimile Reference vanced Features> .
❒ To check the contents of the Groups,
print the list. See “Key Operator
Tools”, General Settings Guide.
Specifying a destination using the Quick
Dial key
AAAA
Press the Quick Dial key in which
the destination's number is pro-
grammed.
If the destionation's name has been
stored, the name is shown on the
display. If it is not, the fax number
or e-mail address is shown.
Note
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key and try again.
❒ If you want to specify another
destination, press [Add Dest] and
specify another fax number or
e-mail address.
❒ You do not have to press [Add
Dest] when adding a destination
using the Quick Dial keys.
BBBB
Press the
{{{{Start}}}} key.
Specifying a group of destinations using
the Quick Dial key
AAAA
Place the original, and then select
the scan settings you require.
BBBB
Press the Quick Dial key in which
the Group is programmed.
ABZ013S ABZ013S
StellaC2-GBcombine-F_FM_ZF.book Page 30 Wednesday, November 26, 2003 5:04 PM