Dixon Aficio 1515 - Manual (Page 627)

Printing with NetWare
57
5
Note
❒ As context, object names are
entered in lower object order
and divided by a period. For
example, if you want to cre-
ate a print server into NET
under d, enter “d”.
F In the [Print Server Operation
Mode] area, click [As Print Serv-
er] .
G Click [OK] to close the [NIB Set-
up Tool - Network board list] dialog
box.
IIII
Quit SmartDeviceMonitor for Ad-
min.
After this step, operate the ma-
chine by following the procedure
from step
I on p.59 “NetWare 4.x,
5/5.1, 6”. However, steps N -
C and
N -
D are not required.
Setting Up as a Remote Printer
NetWare 3.x
AAAA
Log on to the file server as an ad-
ministrator, or equivalent.
BBBB
Start SmartDeviceMonitor for Ad-
min.
CCCC
On the [Group] menu, point to
[Search Device]
, and then click
[IPX/SPX] .
A list of machines appears.
DDDD
In the list, select the printer for
which you want to change config-
uration.
EEEE
On the [Tools] menu, click [NIB Set-
up Tool]
.
NIB Setup Tool starts.
FFFF
Click [Property Sheet], and then
click [OK].
The [NIB Setup Tool - Network board
list]
dialog box appears.
GGGG
Click the [NetWare] tab, and then
make the following settings:
A In the [Print Server Name:] box,
enter the name of the print
server.
Limitation
❒ Enter up to 47 alphanumeric
characters.
B In the [File Server Name:] box, en-
ter the name of the file server
in which a print server is to be
created.
By clicking [Browse…], you can
select a file server among those
listed in the [Browse…] dialog
box.
Limitation
❒ Enter up to 47 alphanumeric
characters.
C In the [Print Server Operation
Mode] area, click [As Remote
Printer] .
D In the [Remote Printer No.] box,
enter the printer number.
Important
❒ Use the same printer number
as that to be created in the
print server.
E Click [OK] to close the [NIB Set-
up Tool - Network board list] dialog
box.
HHHH
Quit SmartDeviceMonitor for Ad-
min.