Dixon Aficio 1515 User Manual
Page 387
![background image](/manuals/79061/387/background.png)
Memory Transmission
15
2
BBBB
Place the original in the ADF, or
on the exposure glass.
Note
❒ You can send the first few pages
from the exposure glass then
the remaining pages from the
ADF. After you remove the last
page from the exposure glass,
you have 60 seconds to insert
the remaining pages in the ADF.
❒ Note that you cannot place orig-
inals on the exposure glass after
you start using the ADF.
Reference
p.11 “Placing Originals”
CCCC
Make the settings you require.
Reference
p.23 “Scan Settings”
p.24 “Original Type”
p.25 “Image Density (Con-
trast)”
DDDD
Specify a destination.
Note
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key, and then enter
the correct number.
Reference
p.27 “Entering a Fax Number”
p.29 “Entering an E-mail Ad-
dress”
p.29 “Using the Destination
List”
p.23 “Chain Dial”, Facsimile Ref-
erence
ence
EEEE
When sending the same original
to several destinations (broad-
casting), press [Add Dest] to speci-
fy other destinations.
Note
❒ You do not have to press [Add
Dest]
when adding a destination
using a Quick Dial key.
❒ If you do not want to do a broad-
cast transmission, proceed to step
G
.
FFFF
Specify a destination.
Note
❒ Press [
]
to switch the des-
tination between fax number
and e-mail address.
❒ If you want to specify another
destination, repeat steps
E
and
F
.
StellaC2-GBcombine-F_FM_ZF.book Page 15 Wednesday, November 26, 2003 5:04 PM