Dixon Aficio 1515 - Manual (Page 763)

Copying from the Bypass Tray
27
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
Note
❒ If you do not use standard size
copy paper, you should enter ver-
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
Reference
For details about paper capacity in
the bypass tray, see p.12 “Copy Pa-
per”.
AAAA
Open the bypass tray.
BBBB
Adjust the paper guides and gen-
tly insert the copy paper face
down.
1. Horizontal size
2. Vertical size
3. Paper guides
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Note
❒ Set the direction of the copy pa-
per to L.
❒ If you set A4, 8 1 /
2
"
× 14" or larg-
er copy paper, hold the edge of
the paper.
❒ You can specify the type of pa-
per used for the bypass tray. See
“6. Bypass Paper Type” in p.54
“Copier Features”
❒ The machine operates the func-
tion that forces to feed the paper
in three minutes after you load
the paper on the bypass tray.
Metric version • Vertical: 90 –
216mm
• Horizontal: 140 –
356 mm
Inch version • Vertical: 3.5" – 8.5"
• Horizontal: 5.5" –
14"
StellaC1a-EN-CopyF_V4_FM.book Page 27 Wednesday, September 12, 2001 4:03 PM