Dixon Aficio 1515 - Manual (Page 624)

Using the Printer Function
54
5
HHHH
Select the [NetWare] check box,
and then click [Next >].
IIII
Click [Bindery Mode], enter the file
server name in the [File Server
Name:]
box, and then click [Next >].
• In the [File Server Name:] box, en-
ter the file server name (up to 47
alphanumeric characters) of the
server to make the print server.
You can also click [Browse…] to
s e l e c t a f i l e s e r v e r i n t h e
[Browse…]
dialog box.
JJJJ
Enter the print server name in the
[Print Server Name:]
box, the printer
name in the [Printer Name:] box,
and the print queue name in the
[Print Queue Name:]
box, then click
[Next >] .
• In the [Print Server Name:] box,
enter the name of the NetWare
print server using up to 47 char-
acters.
• In the [Printer Name:] box, enter
the name of the NetWare print-
er using up to 47 characters.
• In the [Print Queue Name:] box,
enter the name of the print
queue to be added to NetWare.
KKKK
After confirming the settings,
click [Next >].
The settings take effect, and NIB
Setup Tool closes.
LLLL
Quit SmartDeviceMonitor for
Admin.
MMMM
Restart the printer.
Note
❒ To make sure the printer is cor-
rectly configured, enter the fol-
lowing fro m the com mand
prompt:
F:> USERLIST
❒ If the printer works as config-
ured, the name of the print serv-
er appears as an attached user.
NetWare 4.x, 5/5.1, 6
Important
❒ You must set up the print server
using NDS mode in NetWare 4.x,
5/5.1, 6.
❖ ❖ ❖ ❖ To use NetWare 5/5.1, 6
• Use the printer as a print server.
Do not use it as a remote printer
in a PureIP environment.
• If you use PureIP, configure the
machine to use TCP/IP. For
more information about how to
make the settings, see p.15 “Set-
ting Up the Machine on a Net-
work”.
AAAA
Log on to the file server as an ad-
ministrator, or equivalent.
BBBB
Start SmartDeviceMonitor for
Admin.
CCCC
On the [Group] menu, point to
[Search Device]
, and then click
[IPX/SPX] or [TCP/IP].
A list of machines appears.
DDDD
In the list, select the printer for
which you want to change config-
uration.
EEEE
On the [Tools] menu, click [NIB Set-
up Tool]
.
NIB Setup Tool starts.
Reference
If you use NetWare 5/5.1 or
NetWare 6 in a PureIP environ-
ment, see p.56 “Using PureIP in
the NetWare 5/5.1, 6 environ-
ment”.