Dixon Aficio 1515 - Manual (Page 1079)

49
6. Key Operator Settings
Function List
Here is a list of the functions that are available for setting. Please refer to the ref-
erence page numbers for more information.
Copy this table and use it as a quick reference.
Display
(Specs.) Description Reference
1. Memory
Lock Allows you to have messages from Spec-
ified Senders stored in memory and not
printed as soon as they are received. To
print the fax messages, you must enter
an ID. p.50 “Memory Lock”
2. Forwarding Allows you to automatically forward fax
messages to the fax machines of Speci-
fied Senders. p.52 “Forwarding”
3. User Param-
eters Allows you to customize various default
settings as required. p.58 “User Parameters”
4. Personal
Code Allows you to set up personal codes for
using the Restricted Access. Before us-
ing the fax machine, users must enter the
Personal Code. This allows you to limit
transmission to specified users. p.63 “Personal Codes”
5. ID Code Allows you to register IDs required for
various types of transmissions. p.66 “ID Code”
6. Line Type Allows you to select tone or pulse dial-
ing to match the telephone line connect-
ed to your fax machine. p.67 “Line Type”
7. PSTN Ac-
cess No. Allows you to specify the code used to
access an outside line when you dialing. p.68 “PSTN Access Number”
8. Mem. File
Trans. Allows you to send all messages stored
in memory to another fax machine and
print them out there, for example, when
your fax machine runs out of toner. p.69 “Memory File Transfer”
9. RDS On/Off Allows you to switch on RDS (Remote
Diagnostic System) so a service repre-
sentative can test your fax machine re-
motely from a service station, diagnose
the problem, and can change your ma-
chine settings to correct the problem.
p.70 “RDS (Remote Diagnostic Sys-
tem)”
StellaCEN-advanced_V4_FM.book Page 49 Tuesday, July 17, 2001 1:01 PM