Dixon Aficio 1515 - Manual (Page 683)

Message List
113
9
Message List
This is a list of messages written to the machine's system log. The system log can
be viewed using the “syslog” command.
System Log Information
You can use the following methods to view the system log:
• telnet : Use the “syslog” command. See p.87 “System log information”.
Message Causes and solutions
Access to NetWare server
denied. Either there is no account for this print
server or the NetWare server or the password
was incorrect. (In print server mode) Cannot log on to the file
server. Make sure the print server is registered
on the file server. If a password is specified for
the print server, delete it.
add_sess: bad trap addr:, com-
munity: The IP address (0.0.0.0.) is unavailable when
the community access type is TRAP. Specify
the host IP address for the TRAP destination.
add_sess: community al-
ready defined. The same community name already exists.
Use another community name.
add_sess_ipx: bad trap addr: ,
The IPX address (00:00:00:00:00:00) is unavail-
able when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
add_sess_ipx: community name> already defined. The community name already exists. Use an-
other community name.
ANONYMOUS FTP LOGIN FROM dress>, An anonymous login has been made with a
password from the host dress>.
anpd start.(AppleTalk) An anpd (AppleTalk Network Package Dae-
mon) has started.
Attach FileServer= Attached to the file server as a nearest server
Attach to print queue (In print server mode) Attached to the print
queue name
Cannot create service connection If the remote printer is working: A connection
with the file server cannot be established. The
amount of data may have exceeded the file
server’s user limit.
If the remote printer is working: The printer
with the required does not
appear in . Check the
printer number of the printer registered in the
print server.
Cannot find rprinter (name>/) Check the printer number registered in the
print server.