Dixon Aficio 1515 - Manual (Page 195)

Preparing the Machine
9
2
CCCC
Gently insert paper face down
into the bypass tray.
1. Extender
2. Paper guides
Note
❒ Do not stack paper over the lim-
it mark, otherwise a skewed im-
age or misfeeds might occur.
❒ Open out the extender to sup-
port paper sizes larger than A4
L, 8 1 /
2
"
×11" L.
❒ Fan the paper to get air between
the sheets to avoid a multi-sheet
feed.
❒ When setting an OHP transpar-
ency, make sure that its front
and back sides are properly po-
sitioned.
❒ Select paper type when printing
onto OHP transparencies or
thick paper (over 105g/m
2 ). For
details, see p.11 “Setting thick
paper or OHP transparencies”.
❒ Select paper type when printing
onto envelopes. For details, see
p.12 “Setting envelopes”.
DDDD
Select the paper size.
Note
❒ You can set paper size using the
printer driver. The following
procedures are not necessary
when setting paper size using
the printer driver.
❒ The paper size set using the
printer driver has priority over
that set using the control panel.
❒ When the printer driver is not
used, make settings using the
control panel.
Reference
For printer driver settings, see
the printer driver Help.
For details about setting custom
sizes, see p.10 “Setting custom
size paper”.
A Press the {{{{User Tools/Counter}}}}
key.
B Select [Printer Features] using
{{{{U U U U}}}} or {{{{T T T T}}}}, and then press the
{{{{OK}}}} key.
C Select [Paper Input] using {{{{U U U U}}}} or
{{{{T T T T}}}}, and then press the {{{{OK}}}}
key.
ABW020S1
StellaC2-GB-Pref1-F3_FM_ZF.book Page 9 Friday, November 21, 2003 8:42 PM