Dixon Aficio 1515 - Manual (Page 1080)

Key Operator Settings
50
6
Using Key Operator Settings
This chapter explains about functions
the key operator handles.
Memory Lock
This is a security function to prevent
unauthorized individuals from read-
ing printed fax messages. When
Memory Lock is switched on, all re-
ceived messages are stored in memo-
ry and are not automatically printed.
To print the messages, you have to
enter the Memory Lock ID.
Note
❒ Before you can use this function,
you must register the Memory
Lock ID. See p.66 “ID Code”
Limitation
❒ Memory Lock cannot be selected
until you have registered the
Memory Lock ID.
❒ To use this function you must
switch Memory Lock on after you
register the Memory Lock ID.
❒ You can select to lock only messag-
es from Specified Users, or you can
select to lock messages from send-
ers other than from Specified Us-
ers. See p.58 “User Parameters”
(switch 09, bits 1 and 0).
AAAA
Press the {{{{User Tools}}}} key.
BBBB
Press
0 0 0 0 or 1 1 1 1 until " 4. Fax Fea-
tures " is displayed.
CCCC
Press the {{{{OK}}}} key.
DDDD
Press 0 0 0 0 or 1 1 1 1 until " 4. Key Op.
Tools " is displayed.
EEEE
Press the
{{{{OK}}}} key.
Confirm that " 1. Memory Lock " is
displayed.
FFFF
Press the {{{{OK}}}} key.
GGGG
Follow the procedures below to
switch Memory Lock On/Off, reg-
ister a Specified Sender, delete a
Specified Sender, or print a list of
Specified Senders.
Switching Memory Lock On/Off
A A A A Press the {{{{OK}}}} key.
B B B B Press 0 0 0 0 or 1 1 1 1 to "On" to switch
this function on, or select "Off"
to switch this function off.
C C C C Press the {{{{OK}}}} key.
StellaCEN-advanced_V4_FM.book Page 50 Tuesday, July 17, 2001 1:01 PM