Dixon Aficio 1515 - Manual (Page 629)

Printing with NetWare
59
5
MMMM
Press the
{{{{ESC}}}} key until the “Ex-
it?” appears, and then click [Yes]
to quit PCONSOLE.
NNNN
Start the print server by entering
the following from the NetWare
server's keyboard.
If it is running, restart after quit-
ting.
❖ ❖ ❖ ❖ To quit
CAREE: unload pserver
❖ ❖ ❖ ❖ To start
C A R E E : l o a d p s e r v e r
print_server_name
Note
❒ If the printer works as config-
ured, “Waiting for job” appears.
❒ NetWare 3.x ends here.
NetWare 4.x, 5/5.1, 6
AAAA
Log on to the file server as an ad-
ministrator, or equivalent.
BBBB
Start SmartDeviceMonitor for
Admin.
CCCC
On the [Group] menu, point to
[Search Device]
, and then click
[IPX/SPX] .
A list of machines appears.
DDDD
In the list, select the printer for
which you want to change config-
uration.
EEEE
On the [Tools] menu, click [NIB Set-
up Tool]
.
NIB Setup Tool starts.
FFFF
Click [Property Sheet], and then
click [OK].
The [NIB Setup Tool - Network board
list]
dialog box appears.
GGGG
Click the [NetWare] tab, and then
make the following settings:
A In the [Logon Mode] area, select
[File Server Mode] or [NDS Mode:].
Note
❒ If [File Server Mode] is select-
ed, a connecting destination
will be chosen based on the
string entered in step
C.
❒ If [NDS Mode:] is selected, a
connecting destination will
be chosen based on the string
entered in step
D.
B In the [Print Server Name:] box,
enter the name of the print
server.
Important
❒ Use the same name as that of
the print server name to be
set from NWadmin (
M -
C).
Limitation
❒ Enter up to 47 alphanumeric
characters.
C In the [File Server Name:] box, en-
ter the name of the file server
in which a print server is to be
created.
By clicking [Browse…], you can
select a file server among those
listed in the [Browse…] dialog
box.
Limitation
❒ Enter up to 47 alphanumeric
characters.
D In the [NDS Tree:] box, enter the
NDS tree name in which to
make the file server.
By clicking [Browse…], you can
select the NDS tree name and
NDS context name from their
lists.