Dixon Aficio 1515 User Manual
Page 528
Key Operator Setting
74
7
Note
❒ If there is an End Receiver already
programmed, a receiver name is
shown. If you want to change the
receiver, press the
{{{{Clear/Stop}}}}
key and proceed to step
F.
❒ To cancel Forwarding, press the
{{{{Cancel}}}} key and proceed to
step
G
.
FFFF
Specify an End Receiver using the
Quick Dial key or searching by
the destination list, and then
press the
{{{{OK}}}} key.
See p.32 “Searching for a Destina-
tion”, Facsimile Reference
GGGG
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
Quitting the forwarding function
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Select [Fax Features] using
{{{{U
U
U
U}}}} or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}} key.
CCCC
Select [Key Operator Tools] using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and then press the
{{{{OK}}}} key.
DDDD
Select [Forwarding] using
{{{{U
U
U
U}}}} or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}} key.
EEEE
Select [Off], using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and
then press the
{{{{OK}}}} key.
FFFF
Press the
{{{{User Tools/Counter}}}} key.
The standby display appears.
Forwarding Mark
You can print a Forwarding Mark on
the receiver's messages that have
been forwarded.
The receiver can distinguish between
forwarded messages and usual recep-
tions.
Note
❒ You can specify whether or not to
print a Forwarding Mark in the
User Parameters. See p.76 “User
Parameters” (switch 02, bit 0).
ABZ018S
StellaC2-AEcombine-F_FM.book Page 74 Tuesday, January 13, 2004 1:22 PM