Placing originals in the adf, Placing regular size originals – Dixon Aficio 1515 User Manual
Page 134
Placing Originals
16
1
Placing Originals in the ADF
Note
❒ Do not stack originals over the lim-
it mark on the side fence of the
ADF.
❒ The last page should be on the bot-
tom.
❒ Do not place anything on the ADF
cover, doing so could cause a mal-
function.
AAAA
Set the document guide to the
original size.
BBBB
Align the edges of the originals
and place them in the ADF with
the side to be copied facing up.
1.
Limit mark
2.
Document guide
Note
❒ Straighten curls in the originals
before placing them in the ADF.
❒ To prevent multiple sheets feed-
ing in at once, fan the originals
before placing them in the ADF.
❒ Set the original squarely.
Placing Regular Size Originals
Note
❒ If you do not specify the original
size, the machine will make copies
on the paper size in the tray select-
ed. When copy paper size and
original size differ, you need to
specify the original size as follows:
AAAA
Place originals face down on the
exposure glass, or face up into the
ADF.
BBBB
Select the paper tray or bypass
tray using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and then
press the
{{{{#}}}} key.
CCCC
Select [Regular Size] using
{{{{U
U
U
U}}}} or
{{{{T
T
T
T}}}}, and then press the {{{{OK}}}} key.
Note
❒ If you selected the bypass tray,
first select [Original Size] using
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}}, and then press the
{{{{OK}}}} key.
ABU026S
StellaC2_GBcopy_F1_pre_FM.book Page 16 Tuesday, December 16, 2003 4:39 PM