Dixon Aficio 1515 - Manual (Page 981)

Faxing
30
2
When Specifying a Group with a Quick
Dial
Make sure that the Memory Trans-
mission indicator is lit, if not, press
the
{{{{Memory Trans.}}}} key to light it.
Note
❒ You must register Groups to Quick
D i a l s b e f o r e h a n d . S e e p . 4 9
“Groups”
AAAA
Make sure that the machine is in
standby mode.
BBBB
Set your original and select any
scan settings you require.
CCCC
Press the Quick Dial key in which
the Group is programmed.
Note
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key and try again.
❒ If you wish to dial another des-
tination, press the {{{{OK}}}} key,
and then dial another fax num-
ber.
DDDD
Press the
{{{{Start}}}} key.
When Specifying a Group with the Group
key
Make sure that the Memory Trans-
mission indicator is lit, if not, press
the
{{{{Memory Trans.}}}} key to light it.
Note
❒ You must program the Group
function in a User Function key be-
forehand. See Chapter 5 “User
Function Keys” in the Advanced
Features manual.
AAAA
Make sure that the machine is in
standby mode.
BBBB
Set your original and select any
scan settings you require.
CCCC
Press the User Function key pro-
grammed with the Group func-
tion.
DDDD
Enter the Group number (1 to 5)
with the number keys.
Note
❒ If you want to specify another
Group, press the {{{{OK}}}} key, and
then repeat step C above.
❒ If you make a mistake, press the
{{{{Clear/Stop}}}} key, and the dis-
play will return to that in step
B.
EEEE
Press the {{{{Start}}}} key.
StellaCEN-basic_V4_FM.book Page 30 Thursday, July 19, 2001 1:39 PM