Dixon Aficio 1515 - Manual (Page 628)

Using the Printer Function
58
5
IIII
Enter “PCONSOLE” from the com-
mand prompt.
F:> PCONSOLE
JJJJ
Create a print queue as follows:
Note
❒ If you are using a currently de-
fined print queue, proceed to
step
K
A On the [Available Options] menu,
click [Print Queue Information],
and then press the
{{{{ENTER}}}}
key.
B Press the {{{{INSERT}}}} key, and
then enter a print queue name.
C Press the {{{{ESCAPE}}}} key to re-
turn to the [Available Options]
menu.
KKKK
Create a printer as follows:
A On the [Available Options] menu,
click [Print Server Information],
and then press the
{{{{ENTER}}}}
key.
B To create a new print server,
press the
{{{{INSERT}}}} key, and
then enter a print server name.
Note
❒ If you are using a currently
defined print server, select
o n e o f t h e p r in t s e rv e rs
shown in the [Print Server] list.
Important
❒ Use the same name as that
specified in NIB Setup Tool.
(Step
G -
A).
C On the [Print Server Information]
menu, click [Print Server Configu-
ration]
.
D On the [Print Server Configura-
tion] menu, click [Printer Configu-
ration] .
E Select the printer indicated as
“Not Installed”.
Important
❒ Use the same number as that
s p e c i fi e d a s t h e R em o t e
Printer No. using NIB Setup
Tool. (Step
G -
D).
F If you want to change the
printe r nam e, ente r a new
name.
Note
❒ The name “Printer x” is as-
signed to the printer. “x”
stands for the number of the
selected printer.
G Click [Remote Parallel, LPT1] as
the printer type.
IRQ, Buffer size, Starting form,
and Queue service mode are au-
tomatically configured.
H Press the {{{{ESC}}}} key, and then
click [Yes] when the confirma-
tion message appears.
I Press the {{{{ESC}}}} key to return to
the [Print Server Configuration]
menu.
LLLL
Assign print queues to the created
printer as follows:
A On the [Print Server Configura-
tion] menu, click [Queues Serv-
iced By Printer] .
B Select the printer created in
step KKKK .
C Press the {{{{INSERT}}}} key to select
a queue serviced by the print-
er.
Note
❒ You can select more than one
queue at a time.
D Follow the instructions on
screen to make other necessary
settings.
When you have finished the
above procedure, make sure the
queues are assigned.